Configuring the Cisco VC 220 Network Camera Software
Network Setting > DDNS
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
51
6
Network Setting > DDNS
Dynamic Domain Name Service (DDNS) is a service that allows your Cisco VC 220
network camera, especially when assigned with a dynamic IP address, to have a
fixed host and domain name. When you complete the configuration, click
Save
to
save the settings; otherwise click
Cancel
to discard the changes.
NOTE
Sign up for DDNS service with the service provider before completing this
procedure.
•
Enable DDNS
—Check the box to enable the Dynamic DNS feature, which
allows you to assign a fixed host and domain name to a dynamic Internet IP
address.
•
Service Provider
—Select a DDNS provider of your choice from the list.
-
Dyndns.org(Dynamic) / Dyndns.org(Custom)
—
http://www.dyndns.com/
-
TZO.com
—
http://www.tzo.com/
-
3322.org
—
http://www.3322.org/
•
Host Name
—Enter the name registered with the DDNS server.
•
Account—Enter either the Username or Email to log into the DDNS server.
When you input a Username, you must input a Password in the next field.
•
Password—Input the password or key to get the DDNS service.
After you complete the fields of Host Name, Account and Password, you can press
Test
to test your configuration. The camera attempts to connect with the DDNS
server to verify the account information was entered correctly. If the test was not
successful, verify the information provided in the DDNS fields.
