manualshive.com logo in svg

Cisco RV016 - Small Business - 10/100 VPN Router, Administration Manual

The Cisco RV016 Small Business 10/100 VPN Router offers secure connectivity and advanced routing capabilities. Find the comprehensive datasheet and user manual for this product available for free download on our website. Unlock the full potential of this router by accessing the essential information at manualshive.com.

Share
Download
background image

VPN

Viewing the Summary Information for VPN

Cisco Small Business RV0xx Series Routers Administration Guide

129

9

 

page, previous page, next page, or final page. Some buttons may be 
unavailable, depending on the number of pages and the current selection.

VPN Clients Status

This section identifies the VPN clients currently connected to the router.

•

No.:

 The ID number of the VPN client.

•

Username:

 The name of the VPN client.

•

Status:

 The status of the VPN client connection.

•

Start Time:

 The time when the VPN client established its VPN connection 

to the router.

•

End Time:

 The time when the VPN client ended its VPN connection to the 

router.

•

Duration:

 The period of time that the VPN connection has been active.

•

Disconnect

: Click this button to disconnect any VPN client.

•

Navigation controls:

 If you have numerous rules, you can adjust the display. 

Use the 

Rows per page list

 at the top right corner of the table to choose the 

number of rules to display on each page. Use the 

Page

 list below the table 

to choose a particular page. Use the navigation buttons to view the first 
page, previous page, next page, or final page. Some buttons may be 
unavailable, depending on the number of pages and the current selection.

Summary of Contents for RV016 - Small Business - 10/100 VPN Router








































































































































































































Reviews:

No comments

Related manuals for RV016 - Small Business - 10/100 VPN Router

3xLogic V250 Quick Start Manual preview
V250
Brand: 3xLogic Pages: 2
Funkwerk TR 200 aw/ bw Operating Instructions preview
TR 200 aw/ bw
Brand: Funkwerk Pages: 2
Kanguru Data Bank User Manual preview
Data Bank
Brand: Kanguru Pages: 13
Ruckus Wireless MediaFlex NG Quick Installation Manual preview
MediaFlex NG
Brand: Ruckus Wireless Pages: 2
Rosewill RNX-N150RT Quick Installation Manual preview
RNX-N150RT
Brand: Rosewill Pages: 10
red lion Yaskawa 2000 Information Sheet preview
Yaskawa 2000
Brand: red lion Pages: 5
Alcatel Speed Touch 591s Technical User'S Manual preview
Speed Touch 591s
Brand: Alcatel Pages: 184
QuickLink QL-CXS Installation Manual preview
QL-CXS
Brand: QuickLink Pages: 8
Network Critical SmartNA-X User Manual preview
SmartNA-X
Brand: Network Critical Pages: 200
F.F. Group RO 1600 PLU Original Instructions Manual preview
RO 1600 PLU
Brand: F.F. Group Pages: 56
Raven RFMOW V2 User Manual preview
RFMOW V2
Brand: Raven Pages: 33
RadioSPECTRAL ICOM IC-7300 Installation Manual preview
ICOM IC-7300
Brand: RadioSPECTRAL Pages: 2
RouterBOARD OmniTik UPA-5HnD Quick Setup Manual And Warranty Information preview
OmniTik UPA-5HnD
Brand: RouterBOARD Pages: 4
Tripp Lite N002-025-RD Specification Sheet preview
N002-025-RD
Brand: Tripp Lite Pages: 3
Helmholz 700-160-3EN02 Quick Start Manual preview
700-160-3EN02
Brand: Helmholz Pages: 14
WIN Enterprises PL-83300 User Manual preview
PL-83300
Brand: WIN Enterprises Pages: 25
Hameg HM6050-2K Manual preview
HM6050-2K
Brand: Hameg Pages: 46
Hamlet HRDSL108W Quick Installation Manual preview
HRDSL108W
Brand: Hamlet Pages: 6

Brands by name

Popular brands

Load more brands