Firewall
Configuring Firewall Access Rules
Cisco Small Business RV0xx Series Routers Administration Guide
103
7
Configuring Firewall Access Rules
The default access rules should be sufficient for most small businesses. However,
you can use the
Firewall > Access Rules
page to modify or add new access rules
for your network. Access rules determine which traffic is allowed to pass through
the router’s firewall. Optionally, you can set a schedule to activate or deactivate
each access rule for specified days and times.
To open this page:
Click
Firewall > Access Rules
in the navigation tree.
NOTE
Before navigating away from this page, click
Save
to save your settings, or click
Cancel
to undo them. Any unsaved changes are abandoned.
Refer to these topics:
•
About Access Rules, page 103
•
Managing Access Rules, page 104
•
Configuring Access Rules, page 106
About Access Rules
The router has the following default rules:
•
All traffic from the LAN to the WAN is allowed.
•
All traffic from the WAN to the LAN is denied.
•
All traffic from the LAN to the DMZ is allowed.
•
All traffic from the DMZ to the LAN is denied.
