manualshive.com logo in svg

Cisco RV016 - Small Business - 10/100 VPN Router, Administration Manual

The Cisco RV016 Small Business 10/100 VPN Router offers secure connectivity and advanced routing capabilities. Find the comprehensive datasheet and user manual for this product available for free download on our website. Unlock the full potential of this router by accessing the essential information at manualshive.com.

Share
Download
background image

VPN

Setting Up a Gateway to Gateway (Site to Site) VPN

Cisco Small Business RV0xx Series Routers Administration Guide

132

9

 

-

IP Only: 

Choose this option if this router has a static WAN IP address. 

The WAN IP address appears automatically. 

For the 

Remote Security Gateway Type

, an extra field appears. If you 

know the IP address of the remote VPN router, choose 

IP Address

, and 

then enter the address. If you do not know the IP address of the remote 
VPN router, select 

IP by DNS Resolved

, and then enter the real domain 

name of the router on the Internet. Cisco RV082 will get the IP address of 
remote VPN device by DNS Resolved, and IP address of remote VPN 
device will be displayed in the VPN Status section of the 

VPN > 

Summary

 page. 

-

IP + Domain Name (FQDN) Authentication: 

Choose this option if this 

router has a static IP address and a registered domain name, such as 

MyServer.MyDomain.com

. Also enter the 

Domain Name

 to use for 

authentication. The domain name can be used only for one tunnel 
connection. 

For the 

Remote Security Gateway Type

, an extra field appears. If you 

know the IP address of the remote VPN router, choose 

IP Address

, and 

then enter the address. If you do not know the IP address of the remote 
VPN router, select 

IP by DNS Resolved

, and then enter the real domain 

name of the router on the Internet. Cisco RV082 will get the IP address of 
remote VPN device by DNS Resolved, and the IP address of remote VPN 
device will be displayed in the VPN Status section of the 

VPN > 

Summary

 page. 

-

IP + E-mail Addr.(USER FQDN) Authentication:

 Choose this option if 

this router has a static IP address and you want to use an email address 
for authentication. The current WAN IP address appears automatically. 
Enter any 

Email Address

 to use for authentication. 

For the 

Remote Security Gateway Type

, an extra field appears. If you 

know the IP address of the remote VPN router, choose 

IP Address

, and 

then enter the address. If you do not know the IP address of the remote 
VPN router, select 

IP by DNS Resolved

, and then enter the real domain 

name of the router on the Internet. Cisco RV082 will get the IP address of 
remote VPN device by DNS Resolved, and IP address of remote VPN 
device will be displayed in the VPN Status section of the 

VPN > 

Summary

 page. 

-

Dynamic IP + Domain Name (FQDN) Authentication:

 Choose this 

option if this router has a dynamic IP address and a registered Dynamic 
DNS hostname (available from providers such as DynDNS.com). Enter a 

Domain Name

 to use for authentication. The domain name can be used 

only for one tunnel connection.

Summary of Contents for RV016 - Small Business - 10/100 VPN Router








































































































































































































Reviews:

No comments

Related manuals for RV016 - Small Business - 10/100 VPN Router

D-Link DI-106 Series Faq preview
DI-106 Series
Brand: D-Link Pages: 29
D-Link DGS-3700 Series User Manual preview
DGS-3700 Series
Brand: D-Link Pages: 292
D-Link DGS-3224SR User Manual preview
DGS-3224SR
Brand: D-Link Pages: 140
D-Link DGS-1224T - Web Smart Switch User Manual preview
DGS-1224T - Web Smart Switch
Brand: D-Link Pages: 61
D-Link DI-LB604 - Load Balancing Router Quick Installation Manual preview
DI-LB604 - Load Balancing Router
Brand: D-Link Pages: 14
D-Link DIR-605L Specification preview
DIR-605L
Brand: D-Link Pages: 2
D-Link DIR-510L Manual preview
DIR-510L
Brand: D-Link Pages: 45
D-Link DES-3550 Manual preview
DES-3550
Brand: D-Link Pages: 218
D-Link DES-3528 - xStack Switch - Stackable User Manual preview
DES-3528 - xStack Switch - Stackable
Brand: D-Link Pages: 322
D-Link DIR-130 - Broadband VPN Router How To Set Up preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 10
D-Link DIR-130 - Broadband VPN Router Troubleshooting Manual preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 4
D-Link DIR-130 - Broadband VPN Router Configuration preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 13
D-Link DIR Series Configuration Manual preview
DIR Series
Brand: D-Link Pages: 13
D-Link DI-804HV - Express ENwork Router Configuration Manual preview
DI-804HV - Express ENwork Router
Brand: D-Link Pages: 19
D-Link DI-808HV Quick Installation Manual preview
DI-808HV
Brand: D-Link Pages: 12
D-Link DI-804 Quick Install Manual preview
DI-804
Brand: D-Link Pages: 8
D-Link DI-604UP Quick Install Manual preview
DI-604UP
Brand: D-Link Pages: 16
D-Link DI-304 Technical Bulletin preview
DI-304
Brand: D-Link Pages: 7

Brands by name

Popular brands

Load more brands