manualshive.com logo in svg

Cisco RV016 - Small Business - 10/100 VPN Router, Administration Manual

The Cisco RV016 Small Business 10/100 VPN Router offers secure connectivity and advanced routing capabilities. Find the comprehensive datasheet and user manual for this product available for free download on our website. Unlock the full potential of this router by accessing the essential information at manualshive.com.

Share
Download
background image

Cisco ProtectLink Web

Specifying the Global Settings for Approved URLs and Clients

Cisco Small Business RV0xx Series Routers Administration Guide

115

8

 

Specifying the Global Settings for Approved URLs and Clients

After you activate your service, you can use the 

Cisco ProtectLink Web > Global 

Settings

 page to configure the services on the router.

To open this page: 

Click 

ProtectLink

 

> Global Settings 

in the navigation tree. 

NOTE

This page is available only if you activated your Cisco ProtectLink Web service. See 

Getting Started with Cisco ProtectLink Web, page 113

.

You can specify approved URLs that the users are always able to access. You also 
can specify approved clients who are not subject to the restrictions that you 
configure in Web Protection. 

To add an entry to the 

Approved URLs

 table or the 

Approved Clients

 table, click 

Add

. To delete an entry, click the Delete icon.

NOTE

Before navigating away from this page, click 

Save

 to save your settings, or click 

Cancel

 to undo them. Any unsaved changes are abandoned.

Summary of Contents for RV016 - Small Business - 10/100 VPN Router








































































































































































































Reviews:

No comments

Related manuals for RV016 - Small Business - 10/100 VPN Router

D-Link DSL-2740B Installation Manual preview
DSL-2740B
Brand: D-Link Pages: 10
D-Link DSL-G2562DG Quick Start Manual preview
DSL-G2562DG
Brand: D-Link Pages: 2
Billion BiPAC 4500NZ(L) User Manual preview
BiPAC 4500NZ(L)
Brand: Billion Pages: 146
DBM ACE9600 Operating Manual preview
ACE9600
Brand: DBM Pages: 50
D-Link DSR-500 User Manual preview
DSR-500
Brand: D-Link Pages: 213
Ubiquiti U5-24-500W Quick Start Manual preview
U5-24-500W
Brand: Ubiquiti Pages: 23
iDirect iQ Desktop+ Installation, Support, And Maintenance Manual preview
iQ Desktop+
Brand: iDirect Pages: 52
Devolo Magic WiFi mini Ek Manual preview
Magic WiFi mini Ek
Brand: Devolo Pages: 22
3Com NJ220 - IntelliJack Switch User Manual preview
NJ220 - IntelliJack Switch
Brand: 3Com Pages: 82
B&B Electronics Conel UR5i v2 Libratum User Manual preview
Conel UR5i v2 Libratum
Brand: B&B Electronics Pages: 32
AirTies Air 4240 User Manual preview
Air 4240
Brand: AirTies Pages: 28
Perle IOLAN MDC User Manual preview
IOLAN MDC
Brand: Perle Pages: 491
Rosco ND100 User Manual preview
ND100
Brand: Rosco Pages: 20
Zhone 6388-A2 User Manual preview
6388-A2
Brand: Zhone Pages: 53
Ryobi RE180PL1 Operator'S Manual preview
RE180PL1
Brand: Ryobi Pages: 44
IBM Nways 2216 Service And Maintenance Manual preview
Nways 2216
Brand: IBM Pages: 168
Clas Ohlson AE222X1 Quick Start Manual preview
AE222X1
Brand: Clas Ohlson Pages: 4
YDI WL2400-ISA Installation & Operation Manual preview
WL2400-ISA
Brand: YDI Pages: 16

Brands by name

Popular brands

Load more brands