Firewall
Configuring Firewall Access Rules
Cisco Small Business RV0xx Series Routers Administration Guide
105
7
priority rule takes precedence. The default access rules have the lowest
priority.
When an access rule is created, the router automatically assigns a priority;
however, you can change the priority after the rule is created.
•
Enable:
To enable a rule, check the
Enable
box. To disable a rule, uncheck
the box. You cannot change the default rules.
Additional information appears that cannot be changed on this page:
•
Action:
The action that the rule performs, to Allow or Deny access
•
Service:
The service that is affected by this rule
•
Source Interface:
The source interface that is affected by this rule
•
Source:
The IP address for the source of the traffic, or Any
•
Destination:
The IP address for the destination of the traffic, or Any
•
Time:
A specific time interval when the access rule is active, or Always
•
Day:
Specific days when the access rule is active, or Always
Add or edit rules as needed.
•
To add a rule:
Click
Add New Rule
. Enter the settings, as described in
Configuring Access Rules, page 106
.
•
To modify a custom rule:
Click the
Edit
icon. Enter the settings, as
described in
Configuring Access Rules, page 106
.
•
To delete an access rule:
Click the
Delete
icon. When the confirmation
message appears, click
OK
to continue, or click
Cancel
to close the
message without deleting the rule.
•
To delete all custom rules:
Click
Restore to Default Rules
.
