manualshive.com logo in svg

Cisco RV016 - Small Business - 10/100 VPN Router, Administration Manual

The Cisco RV016 Small Business 10/100 VPN Router offers secure connectivity and advanced routing capabilities. Find the comprehensive datasheet and user manual for this product available for free download on our website. Unlock the full potential of this router by accessing the essential information at manualshive.com.

Share
Download
background image

Firewall

Configuring the General Firewall Settings

Cisco Small Business RV0xx Series Routers Administration Guide

100

7

 

NOTE

•

If you want to disable the firewall (not recommended), you can do so only if 
you have configured the administrator password. If you are still using the 
default password, you must change it. For more information, see 

Changing 

the Administrator Username and Password, page 40

.

•

Before navigating away from this page, click 

Save

 to save your settings, or 

click 

Cancel

 to undo them. Any unsaved changes are abandoned.

Enable or disable the firewall and related features: 

•

Firewall:

 Choose to enable or disable the firewall. This feature is enabled 

by default and is strongly recommended to protect your network. Enabling 
or disabling the firewall also affects several related features, as described 
below. Disabling the firewall also disables Access Rules and Content Filters.

If you choose 

Disable

 and you are still using the default administrator 

password, a message appears. To protect your router from unauthorized 
access, you must change the password before you can disable the firewall. 
Click 

OK

 to continue to the 

Password

 page, or click 

Cancel

 to remain on the 

current page. After you change your password, you can return to this page 
to resume this procedure.

•

SPI (Stateful Packet Inspection): 

When enabled, this feature allows the 

router to review the information that passes through the firewall. It inspects 
all packets based on the established connection, prior to passing the 
packets for processing through a higher protocol layer. This feature can be 
enabled only when the firewall is enabled.

•

DoS (Denial of Service):

 When enabled, this feature protects internal 

networks from Internet attacks, such as SYN Flooding, Smurf, LAND, Ping of 
Death, IP Spoofing, and reassembly attacks. This feature can be enabled 
only when the firewall is enabled.

•

Block WAN Request:

 When enabled, this feature allows the router to drop 

both unaccepted TCP requests and ICMP packets from the WAN side. 
Hackers will not find the router by pinging the WAN IP address. This feature 
can be enabled only when the firewall is enabled.

•

Remote Management:

 When enabled, this feature allows you to connect to 

the router’s web-based configuration utility through a WAN connection. This 
feature is disabled by default. It can be enabled only when the firewall is 
enabled. If you want to enable remote management, you should first 
configure a strong administrator password on the 

Setup > Password 

page. 

This precaution prevents an unauthorized user from accessing the router 
with the default password. If you enable this feature, you can keep the 

Summary of Contents for RV016 - Small Business - 10/100 VPN Router








































































































































































































Reviews:

No comments

Related manuals for RV016 - Small Business - 10/100 VPN Router

Ubiquiti ER-4 Quick Start Manuals preview
ER-4
Brand: Ubiquiti Pages: 22
Ubiquiti UniFi UAP-AC-LR Quick Start Manual preview
UniFi UAP-AC-LR
Brand: Ubiquiti Pages: 28
Internet Security Systems Proventia A1204 User Manual preview
Proventia A1204
Brand: Internet Security Systems Pages: 42
INNOSILICON T3-43T User Manual preview
T3-43T
Brand: INNOSILICON Pages: 11
KYLAND Technology KIEN1009 Hardware Installation Manual preview
KIEN1009
Brand: KYLAND Technology Pages: 24
Wave wifi MBR Series Quick Start Manual preview
MBR Series
Brand: Wave wifi Pages: 3
Cradlepoint wipipe CTR350 Quick Start Manual preview
wipipe CTR350
Brand: Cradlepoint Pages: 2
H3C SecPath F50X0 Series Manual preview
SecPath F50X0 Series
Brand: H3C Pages: 41
HALNy HL-4GXV-F Quick Installation Manual preview
HL-4GXV-F
Brand: HALNy Pages: 12
GRASS VALLEY BDS-1602CP Installation Manual preview
BDS-1602CP
Brand: GRASS VALLEY Pages: 22
MikroTik C52iG-5HaxD2HaxD-TC Quick Manual preview
C52iG-5HaxD2HaxD-TC
Brand: MikroTik Pages: 23
MikroTik CCR2004-16G-2S+PC Quick Manual preview
CCR2004-16G-2S+PC
Brand: MikroTik Pages: 20
QNAP TVS- 72XU Series User Manual preview
TVS- 72XU Series
Brand: QNAP Pages: 56
Bosch D9210B Operation And Installation Manual preview
D9210B
Brand: Bosch Pages: 28
Bosch DVRXEAP01 Installation Manual preview
DVRXEAP01
Brand: Bosch Pages: 44
Bosch D8125INV Operation And Installation Manual preview
D8125INV
Brand: Bosch Pages: 40
Bosch Conettix ITS-D6686-INTL Installation Manual preview
Conettix ITS-D6686-INTL
Brand: Bosch Pages: 10
Bosch VIP XD Quick Installation Manual preview
VIP XD
Brand: Bosch Pages: 12

Brands by name

Popular brands

Load more brands