DHCP
Setting Up the DHCP Server or DHCP Relay
Cisco Small Business RV0xx Series Routers Administration Guide
67
4
The devices are listed by the IP address and the MAC address. (Typically the MAC
address appears on a label on the bottom panel or back panel of a device.) If
needed, you can click
Refresh
to update the data.
STEP 2
To select a device, first enter a descriptive
Name
. Then check the
Enable
box.
Alternatively, select all devices in the list by clicking the check box at the top of the
Enable
column.
STEP 3
Click
OK
to add the devices to the
Static IP
list, or click
Close
to close the pop-up
window without adding the selected devices. After you click
OK
, a message
appears. The message includes important information. Read it before clicking
OK
.
Keep the browser open and wait until the selected MAC addresses appear in the
Static IP
list.
STEP 4
Modify or remove list entries, as needed:
•
To modify the settings:
Click a device in the list. The information appears in
the text fields. Make the changes, and then click
Update
. If you do not need
to make changes, you can click
Add New
to de-select the entry and clear the
text fields.
•
To delete an entry from the list:
Click the entry that you want to delete, and
then click
Delete
. To select a block of entries, click the first entry, hold down
the
Shift
key, and then click the final entry in the block. To select individual
entries, press the
Ctrl
key while clicking each entry. To de-select an entry,
press the
Ctrl
key while clicking the entry.
Assigning static IP addresses by entering devices manually
In the
Static IP Address
section, add or edit entries as needed. Remember that the
settings are not saved until you click the Save button.
•
To add a new device to the list:
Enter the following information, and then
click
Add to list
.
-
Static IP Address:
Enter the static IP address. You can enter 0.0.0.0 if
you want the router to assign a static IP address to the device.
-
MAC Address:
Enter the MAC address of the device. (Typically the MAC
address appears on a label on the bottom panel or the back panel of a
device.) Enter the address without punctuation.
-
Name:
Enter a descriptive name for the device.
-
Enable:
Check this box to assign the static IP address to this device.
•
To add another new entry:
Enter the information, and then click
Add to list
.
