manualshive.com logo in svg

Cisco RV016 - Small Business - 10/100 VPN Router, Administration Manual

The Cisco RV016 Small Business 10/100 VPN Router offers secure connectivity and advanced routing capabilities. Find the comprehensive datasheet and user manual for this product available for free download on our website. Unlock the full potential of this router by accessing the essential information at manualshive.com.

Share
Download
background image

Setting Up Advanced Routing

Cisco Small Business RV0xx Series Routers Administration Guide

58

3

 

Configuring Dynamic Routing

Enter the settings for 

dynamic routing

 by using 

Routing Information Protocol 

(RIP)

 (see the glossary for more information). 

Dynamic Routing for IPv4:

Click the 

IPv4

 tab, and then enter the settings described below.

•

Working Mode

: Choose one of the following options.

-

Gateway:

 Choose this mode if the router is hosting your network’s 

connection to the Internet. This is the default setting.

-

Router:

 Choose this mode if the router exists on a network with other 

routers, and another router acts as the network gateway to the Internet. 
In Router mode, Internet connectivity is available only if you have another 
router that functions as the Gateway. Since firewall protection is 
provided by the gateway router, disable this router’s firewall. See 

Configuring the General Firewall Settings, page 99

.

•

RIP:

 Routing Information Protocol allows a router to exchange its routing 

information automatically with other routers, and to dynamically adjust its 
routing tables as network changes occur. RIP prevents routing loops by 
using a hop limit. To enable this option, select 

Enabled

. Otherwise, keep the 

default setting, 

Disabled

. If you enable this feature, also configure the 

following settings:

•

Receive RIP versions:

 Select the RIP protocol for receiving network data: 

None

, 

RIPv1

, 

RIPv2

, or 

Both RIP v1 and v2

. 

RIPv1

 is a class-based routing version. It does not include subnet 

information and therefore does not support variable length subnet masks 
(VLSM). RIPv1 also lacks support for router authentication, making it 
vulnerable to attacks. 

RIPv2

 carries a subnet mask and supports password 

authentication security. 

•

Transmit RIP versions:

 Select the RIP protocol for transmitting network 

data: 

None

, 

RIPv1

, 

RIPv2 - Broadcast

, or 

RIPv2

 

- Multicast

.

RIPv2 - Broadcast

 (recommended) broadcasts data in the entire subnet. 

RIPv2

 

- Multicast

 sends data to multicast addresses. RIPv2 - Multicast also 

helps to avoid unnecessary load by multicasting routing tables to adjacent 
routers rather than broadcasting to the entire network.

Summary of Contents for RV016 - Small Business - 10/100 VPN Router








































































































































































































Reviews:

No comments

Related manuals for RV016 - Small Business - 10/100 VPN Router

Hornington AirStation WHR-G300N Settings preview
AirStation WHR-G300N
Brand: Hornington Pages: 6
IDT Tsi310TM User Manual preview
Tsi310TM
Brand: IDT Pages: 207
Cabletron Systems SmartSwitch 8-slot User'S Reference Manual preview
SmartSwitch 8-slot
Brand: Cabletron Systems Pages: 150
Intel IXP45X Developer'S Manual preview
IXP45X
Brand: Intel Pages: 958
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
GarrettCom Industrial Network Track OSI Brochure preview
Industrial Network Track OSI
Brand: GarrettCom Pages: 10
Patton ipRocketLink 3101 Series Getting Started Manual preview
ipRocketLink 3101 Series
Brand: Patton Pages: 119
Manson Engineering Industrial SBC-6108 User Manual preview
SBC-6108
Brand: Manson Engineering Industrial Pages: 10
Stephen SON8010U User Manual preview
SON8010U
Brand: Stephen Pages: 8
C&H Technologies AM105 Brochure preview
AM105
Brand: C&H Technologies Pages: 1
QNAP QSW-3216R-8S8T Quick Installation Manual preview
QSW-3216R-8S8T
Brand: QNAP Pages: 11
UltrArmor UA3 Series User Manual preview
UA3 Series
Brand: UltrArmor Pages: 3
UfiSpace S9601-104BC Hardware Installation Manual preview
S9601-104BC
Brand: UfiSpace Pages: 34
ubiquoss U9016B Installation Manual preview
U9016B
Brand: ubiquoss Pages: 46
RadioLAN Campus BridgeLINK User Manual preview
Campus BridgeLINK
Brand: RadioLAN Pages: 146
TP-Link TL-WR702N User Manual preview
TL-WR702N
Brand: TP-Link Pages: 186
Siemens SL2-141-I Quick Start Manual preview
SL2-141-I
Brand: Siemens Pages: 24
Siemens SLI-5310 User Manual preview
SLI-5310
Brand: Siemens Pages: 128

Brands by name

Popular brands

Load more brands