manualshive.com logo in svg

Cisco RV016 - Small Business - 10/100 VPN Router, Administration Manual

The Cisco RV016 Small Business 10/100 VPN Router offers secure connectivity and advanced routing capabilities. Find the comprehensive datasheet and user manual for this product available for free download on our website. Unlock the full potential of this router by accessing the essential information at manualshive.com.

Share
Download
background image

VPN

Viewing the Summary Information for VPN

Cisco Small Business RV0xx Series Routers Administration Guide

126

9

 

Viewing the Summary Information for VPN

The 

VPN > Summary

 page displays general information about the router’s VPN 

tunnel settings. The router supports up to 100 tunnels.

NOTE

If the PPTP Server is enabled, summary information about PPTP clients appears on 
the 

VPN > PPTP Server

 page. For more information, see 

Setting Up PPTP Server, 

page 150

.

To open this page:

 Click 

VPN > Summary

 in the navigation tree.

Summary

•

Tunnel(s) Used:

 The number of VPN tunnels in use.

•

Tunnels Available:

 The number of available VPN tunnels.

•

Detail:

 Click 

Detail

 for more information. Click 

Refresh

 to update the data, 

or click 

Close

 to return to the 

VPN > Summary

 page. For each VPN tunnel, 

the No., Name, Status, Phase 2 Enc/Auth/Grp, Local Group, Remote Group, 
and Remote Gateway will be displayed. 

Summary of Contents for RV016 - Small Business - 10/100 VPN Router








































































































































































































Reviews:

No comments

Related manuals for RV016 - Small Business - 10/100 VPN Router

G-Technology G-DRIVE ev ATC Product Manual preview
G-DRIVE ev ATC
Brand: G-Technology Pages: 35
Axis AXIS P1354 Installation Manual preview
AXIS P1354
Brand: Axis Pages: 104
Direct IP IDIS DR-1304P Operation Manual preview
IDIS DR-1304P
Brand: Direct IP Pages: 76
Quectel Wi-Fi-M.2 EVB User Manual preview
Wi-Fi-M.2 EVB
Brand: Quectel Pages: 23
C-Data CR200-1432R-B User Manual preview
CR200-1432R-B
Brand: C-Data Pages: 26
Jøtul ERS 01 Operation And Maintenance Manual preview
ERS 01
Brand: Jøtul Pages: 20
JUMO 705041 Installation Instructions Manual preview
705041
Brand: JUMO Pages: 60
Ubiquiti EdgeRouter PoE ERPoe-5 Quick Start Manual preview
EdgeRouter PoE ERPoe-5
Brand: Ubiquiti Pages: 13
Federal Signal Corporation AR2000-M Installation And Maintenance Manual preview
AR2000-M
Brand: Federal Signal Corporation Pages: 49
G&D DVI-Vision-IP-Fiber Installation And Operation Manual preview
DVI-Vision-IP-Fiber
Brand: G&D Pages: 240
Dahua Technology NVR2104/2108HS-W-4KS2 1U User Manual preview
NVR2104/2108HS-W-4KS2 1U
Brand: Dahua Technology Pages: 363
Atlantis WebShare 141 WN Quick Start Manual preview
WebShare 141 WN
Brand: Atlantis Pages: 78
Edgewater Networks EdgeMarc 4300T Installation Manual preview
EdgeMarc 4300T
Brand: Edgewater Networks Pages: 23
One Identity Safeguard for Privileged Sessions 3000 Installation Manual preview
Safeguard for Privileged Sessions 3000
Brand: One Identity Pages: 37
Thecus 1U4600 User Manual preview
1U4600
Brand: Thecus Pages: 148
H3C MSR-20-21 ROUTER Installation Manual preview
MSR-20-21 ROUTER
Brand: H3C Pages: 83
Baileigh 1019072 Operator'S Manual preview
1019072
Brand: Baileigh Pages: 20
Bdcom GP3600-16 Hardware Installation Manual preview
GP3600-16
Brand: Bdcom Pages: 25

Brands by name

Popular brands

Load more brands