1-142
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Alarm Troubleshooting
1.7.242 TX-AIS
Note
For more information about Ethernet cards, refer to the
Cisco ONS 15310-CL and Cisco ONS 15310-MA
Ethernet Card Software Feature and Configuration Guide
.
Clear the TPTFAIL (CE100T) Alarm
Step 1
Clear any alarms being reported by the OC-N port on the CE100T-8 circuit.
Step 2
If no alarms are reported by the OC-N port, or if the
“PDI-P” condition on page 1-114
is reported, the
problem could be on the far-end G-Series Ethernet port. Clear any alarms, such as CARLOSS, reported
against the far-end port or card.
Step 3
If the alarm does not clear, log into the Technical Support Website at http://www.cisco.com/techsupport
for more information or call Cisco TAC (1 800 553-2447) in order to report a Service-Affecting (SA)
problem.
1.7.242 TX-AIS
Default Severity: Not Reported (NR), Non-Service-Affecting (NSA)
SONET Logical Objects: DS1, DS3
The Transmit (TX) Direction AIS condition is raised by the ONS 15310-CL or ONS 15310-MA
backplane when it receives a far-end DS-1 LOS.
Clear the TX-AIS Condition
Step 1
Determine whether there are alarms on the downstream nodes and equipment, especially the
“LOS
(OCN)” alarm on page 1-99
, or OOS ports.
Step 2
Clear the downstream alarms using the applicable procedures in this chapter.
Step 3
If the condition does not clear, log into the Technical Support Website at
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).
1.7.243 TX-LOF
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: DS1, DS3
The Transmit Direction LOF condition is transmitted by the backplane when it receives a DS-1 TX-LOF.
This alarm is raised only at the transmit (egress) side.
Clear the TX-LOF Condition
Step 1
Complete the
“Clear the LOF (DS1) Alarm” procedure on page 1-87
.
