1-20
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Error Messages
EID-3120
No object of type {0} selected to delete.
Choose an object of the specified type to
delete.
EID-3121
Error Deleting {0}
There is an error deleting the item.
EID-3122
No object of type {0} selected to edit.
Choose an object of the specified type to
edit.
EID-3123
Error Editing {0}
There was an error editing the item.
EID-3124
{0} termination is in use.
Delete the associated OSPF Range Table Entry and try again
Refer to the error message text.
EID-3125
No {0} Terminations selected.
No specified terminations are selected.
EID-3126
{0} termination could not be edited.
CTC could not edit the specified
termination.
EID-3127
Unable to provision orderwire because E2 byte is in use by {0}. Refer to the error message text.
EID-3128
The authentication key may only be {0} characters maximum
The authentication key cannot exceed the
specified number of characters.
EID-3129
The authentication keys do not match!
Refer to the error message text.
EID-3130
Error creating OSPF area virtual link.
CTC encountered an error while creating
the area virtual link.
EID-3131
Error creating OSPF virtual link.
CTC encountered an error creating the
virtual link.
EID-3132
Error setting OSPF area range: {0}, {1}, false.
CTC encountered an error while setting the
area range for the specified values.
EID-3133
Max number of OSPF area ranges exceeded.
OSPF area ranges exceeded the maximum
number.
EID-3134
Invalid Area ID. Use DCC OSPF Area ID, LAN Port Area ID,
or 0.0.0.0.
Refer to the error message text.
EID-3135
Invalid Mask
Refer to the error message text.
EID-3136
Invalid Range Address
The range address is invalid. Try again.
EID-3137
Your request has been rejected because the timing source
information was updated while your changes were still
pending. Please retry.
Refer to the error message text.
EID-3138
Invalid clock source for switching.
You have selected an invalid clock source.
Choose another clock.
EID-3139
Cannot switch to a reference of inferior quality.
Refer to the error message text.
EID-3140
Higher priority switch already active.
You cannot switch the timing source
manually when a higher priority switch is
already active.
EID-3141
Attempt to access a bad reference.
Refer to the error message text.
EID-3142
No Switch Active.
None of the switches are active.
EID-3143
Error creating static route entry.
CTC encountered an error while a creating
static route entry.
Table 1-1
Error Messages (continued)
Error Warning
ID
Error Warning Message
Description
