1-8
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Error Messages
EID-2090
No nodes selected. Please select the node(s) on which to store
the profile(s).
You must select one or more nodes on
which you can store the profile.
EID-2091
Unable to switch to node {0}.
CTC is unable to switch to the specified
node.
EID-2092
General exception error.
CTC encountered a general exception error
while trying to complete the task.
EID-2093
Not enough characters in name. {0}
The name must have a minimum of six
characters.
EID-2094
Password and confirmed password fields do not match.
You must make sure the two fields have the
same password.
EID-2095
Illegal password.
{0}
The password you entered is not allowed.
EID-2096
The user must have a security level.
You must have an assigned security level to
perform this task.
EID-2097
No user name specified.
You did not specify a user name.
EID-2099
Ring switching error.
There was an error during the ring switch.
EID-2100
Please select at least one profile to delete.
You have not selected the profile to delete.
EID-2101
Protection switching error.
There was an error during the protection
switching.
EID-2102
The forced switch could not be removed for some circuits. You
must switch these circuits manually.
The forced switch could not be removed for
some circuits. You must switch these
circuits manually.
EID-2103
Error upgrading span.
There was an error during the span upgrade.
EID-2104
Unable to switch circuits back as one or both nodes are not
reachable.
This error occurs during the path protection
span upgrade procedure.
EID-2106
The node name cannot be empty.
You must supply a name for the node.
EID-2107
Error adding {0}, unknown host.
There was an error adding the specified
item.
EID-2108
{0} is already in the network.
The specified item exists in the network.
EID-2109
The node is already in the current login group.
The node you are trying to add is already
present in the current login group.
EID-2110
Please enter a number between 0 and {0}.
You must enter a number in the range
between 0 and the specified value.
EID-2111
This node ID is already in use. Please choose another.
Select a node ID that is not in use.
EID-2113
Cannot set extension byte for ring.
{0}
CTC cannot set the BLSR/MS-SPRing
extension byte.
EID-2114
Card communication failure. Error applying operation.
This error can occur during an attempt to
apply a BLSR protection operation to a line.
EID-2115
Error applying operation.
{0}
There was an error in applying the specified
operation.
Table 1-1
Error Messages (continued)
Error Warning
ID
Error Warning Message
Description
