1-16
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Error Messages
EID-3021
An error was encountered while retrieving the diagnostics:
{0}
Refer to the error message text.
EID-3022
Requested action not allowed.
The requested action is not allowed.
EID-3023
Unable to retrieve low order cross connect mode.
Refer to the error message text.
EID-3024
Unable to switch {0} cross connect mode.
Please verify that the type and/or number of circuits
provisioned does not exceed the criterion for switching modes.
CTC cannot switch the cross-connect mode
for the specified item, as the type or the
number of circuits does not match with the
criterion for switching modes.
EID-3025
Error while retrieving thresholds.
There was an error retrieving the thresholds.
EID-3026
Cannot modify send DoNotUse.
You cannot modify the Send DoNotUse
field.
EID-3027
Cannot modify SyncMsg.
You cannot modify the SyncMsg field.
EID-3028
Cannot change port type.
You cannot change the port type.
EID-3029
Unable to switch to the byte because an overhead change is
present on this byte of the port.
Refer to the error message text.
EID-3031
Error hard-resetting card.
There was an error while resetting card
hardware.
EID-3032
Error resetting card.
There was an error while resetting the card.
EID-3033
The lamp test is not supported on this shelf.
Refer to the error message text.
EID-3035
The cross connect diagnostics cannot be performed
Refer to the error message text.
EID-3036
The cross connect diagnostics test is not supported on this shelf. The cross-connect diagnostics test is not
supported on this shelf.
EID-3039
Card change error.
There was an error while changing the card.
EID-3040
Invalid card type.
The selected card type is invalid.
EID-3041
Error applying changes.
CTC is unable to create a protection group.
Check if the protect port supports circuits, a
timing reference, SONET SDCC,
orderwire, or a test access point.
EID-3042
The flow control low value must be less than the flow control
high value for all ports in the card.
Refer to the error message text.
EID-3046
The flow control water mark value must be between {0} and
{1}, inclusive.
The flow control watermark value must be
between the two specified values.
EID-3047
The file named {0} could not be read. Please check the name
and try again.
Refer to the error message text.
EID-3048
There is no IOS startup config file available to download.
CTC could not find the configuration file
for IOS startup.
EID-3049
There is an update in progress so the download cannot be done
at this time.
Refer to the error message text.
Table 1-1
Error Messages (continued)
Error Warning
ID
Error Warning Message
Description
