1-23
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Error Messages
EID-3214
Could not get number of HOs for line.
The number of High Orders (STS/STM) for
the line is not available.
EID-3215
Error in refreshing.
Used frequently in pane classes to indicate
a general error condition when trying to
refresh from the model.
EID-3216
Invalid proxy port.
Refer to the error message text.
EID-3217
Could not refresh stats.
CTC could not refresh statistics values.
EID-3218
Unable to launch automatic node setup.
Refer to the error message text.
EID-3219
Unable to refresh automatic node setup information.
Failure trying to retrieve automatic node
setup information.
EID-3220
Error refreshing row {0}
Error refreshing the specified row.
EID-3222
Could not clear stats.
Refer to the error message text.
EID-3225
Error while refreshing pane.
Used frequently in pane classes to indicate
a general error condition when trying to
refresh from the model.
EID-3226
{0} termination(s) could not be deleted. {1}
Refer to the error message text.
EID-3227
Unable to record a baseline, performance metrics will remain
unchanged.
CTC failed to set the baseline values while
provisioning NE. Previous values remain
unchanged.
EID-3228
{0} termination(s) could not be created.
{1}
Refer to the error message text.
EID-3229
RIP is active on the LAN. Please disable RIP before enabling
OSPF.
Turn off the Routing Information Protocol
(RIP) on the LAN, before enabling OSPF.
EID-3230
OSPF is active on the LAN. Please disable OSPF before
enabling RIP.
Turn off the OSPF on the LAN before
enabling RIP.
EID-3231
Error in Set OPR
An error was encountered while attempting
to provision the optical power received
(OPR).
WID-3232
Cannot transition port state indirectly because the port is still
providing services: if the port state should be changed, edit it
directly via port provisioning.
Edit the port state while provisioning the
port.
EID-3233
Current loopback provisioning does not allow this state
transition.
Refer to the error message text.
EID-3234
Current synchronization provisioning does not allow this state
transition
You cannot transition the port state to the
target date while in the current
synchonization state.
EID-3235
Cannot perform requested state transition on this software
version.
Refer to the error message text.
EID-3236
Database Restore failed. {0}
CTC failed to restore the specified
database.
Table 1-1
Error Messages (continued)
Error Warning
ID
Error Warning Message
Description
