1-12
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Error Messages
WID-2175
Extension byte mismatch.
{0}
There is a mismatch with the extension
byte.
WID-2176
Not all spans have the same OSPF Area ID. This will cause
problems with protection switching. To determine the OSPF
Area for a given span, click on the span and the OSPF Area will
be displayed in the pane to the left of the network map.
Refer to the warning message text.
WID-2178
Only one edit pane can be opened at a time. The existing pane
will be displayed.
Refer to the warning message text.
WID-2179
There is no update as the circuit has been deleted.
Refer to the warning message text.
EID-2180
CTC initialization failed in step {0}.
CTC initialization has failed in the specified
step.
EID-2181
This link may not be included as it originates from the
destination.
You must not include this link as it
originates from destination of a circuit. It is
against the path selection algorithm.
EID-2182
The value of {0} is invalid.
The value of the specified item is invalid.
EID-2183
Circuit roll failure. Current version of CTC does not support
bridge and roll on a VCAT circuit.
Refer to the error message text.
EID-2184
Cannot enable the STP on some ports because they have been
assigned an incompatible list of VLANs. You can view the
VLAN/Spanning Tree table or reassign ethernet ports VLANs.
Refer to the error message text.
EID-2185
Cannot assign the VLANs on some ports because they are
incompatible with the Spanning Tree Protocol. You can view
the VLAN/Spanning Tree table or reassign VLANs.
Refer to the error message text.
EID-2186
Software download failed on node {0}.
The software could not be downloaded onto
the specified node.
EID-2187
The maximum length for the ring name that can be used is {0}.
Please try again.
You must shorten the length of the ring
name.
EID-2188
The nodes in this ring do not support alphanumeric IDs. Please
use a ring ID between {0} and {1}.
The ring ID should not contain
alphanumeric characters, and must be in the
specified range.
EID-2189
TL1 keyword "all" can not be used as the ring name. Please
provide another name.
Refer to the error message text.
EID-2190
Adding this span will cause the ring to contain more nodes than
allowed.
You have reached the maximum number of
nodes allowed.
EID-2191
Ring name must not be empty.
You must supply a ring name.
EID-2192
Cannot find a valid route for the circuit creation request.
CTC could not complete the circuit creation
request either beacuse there are no physical
links, or the bandwidth of the available
links are already reserved.
EID-2193
Cannot find a valid route for the circuit drop creation request.
Refer to the error message text.
EID-2194
Cannot find a valid route for the roll creation request.
Refer to the error message text.
Table 1-1
Error Messages (continued)
Error Warning
ID
Error Warning Message
Description
