Cisco MGX 8830, Configuration Manual

Page: 19 / 642

F I G U R E S
xix
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Figure 1-1 Core Switch Topology
1-11
Figure 1-2 Multiservice Edge Aggregation Topology
1-11
Figure 1-3 Virtual Trunk Topology
1-12
Figure 1-4 DSL Edge Aggregation Topology
1-13
Figure 1-5 Using Multiple IP Addresses for Switch Access
1-18
Figure 1-6 Example Network Clock Source Topology with a Single Master Clock Source
1-20
Figure 1-7 Example Network Clock Source Topology with Two Master Clock Sources
1-21
Figure 1-8 Example NCDP Source Topology
1-23
Figure 2-1 Workstation Connection to Console Port on a PXM-UI-S3 Back Card
2-4
Figure 2-2 Workstation Connection to Console Port on a PXM-UI-S3/B Back Card
2-5
Figure 2-3 BITS Clock Source Ports on PXM45 UI-S3 Back Card
2-31
Figure 2-4 BITS Clock Source Ports on PXM1E UI-S3/B Back Card
2-32
Figure 2-5 Hardware Required for Local LAN Connections to PXM-UI-S3 Back Cards
2-39
Figure 2-6 Hardware Required for Local LAN Connections to PXM-UI-S3/B Back Cards
2-40
Figure 3-1 Virtual Trunk Topology
3-9
Figure 3-2 Standalone PXM1E with Intracard APS
3-40
Figure 3-3 Redundant PXM1E Configuration with Intercard APS
3-42
Figure 3-4 Relationship Between Cards, Bays, Lines, and Logical Interface Numbers
3-46
Figure 3-5 Relationship of Port Controller, Controller Partition, and Resource Partitions
3-49
Figure 3-6 IGX Feeder Topology
3-89
Figure 8-1 Example Hierarchical PNNI Network Topology Showing a Two-Level Hierarchy
8-2
Figure 8-2 Soft Reroute Method of Connection Grooming
8-34
Figure 9-1 Filename Format for Released Software
9-13
Figure 9-2 Filename Format for Prereleased Firmware
9-13
Figure 9-3 IMA Group Restart Example
9-93
Figure 10-1 PXM1E-4-155 Back Cards with SC Cable
10-15
Figure 10-2 Standby SFP-8-155 Back Card with SC Conversion Cable
10-16
Figure 10-3 Both SFP-8-155 Back Cards with SC Conversion Cables
10-16
Figure C-1 Workstation Connection to the Console Port
C-2
Figure C-2 Workstation Connection to Console Port on a PXM-UI-S3/B Back Card
C-3
Figure C-3 Terminal Server Connection to the Console Port on a PXM45 UI-S3 Back Card
C-4