3-39
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Chapter 3 Provisioning PXM1E Communication Links
General PXM1E Configuration Procedures
Step 5
To display a list of all conventional and IMA ports on a PXM1E card, enter the dspports command as
shown in the following example:
M8830_CH.1.PXM.a >
dspports
ifNum Line Admin Operational Guaranteed Maximum sctID ifType VPI MINVPI MAXVPI IMA
State State Rate Rate Conf./InUse (VNNI, (EVUNI, (EVUNI, GRP
VUNI) EVNNI) EVNNI)
----- ---- ----- -------------- ---------- ------- ------------ ------ ------ ------- ------- ---
1 N/A Up Up 14367 14367 6/ 6 NNI 0 0 0 2.1
5 2.5 Up LowerLayerDown 3622 3622 0/ 0 =Def NNI 0 0 0 N/A
The IMA Grp column identifies which ports are assigned to IMA groups. The Line column also shows
N/A for IMA groups.
Step 6
To display information on an IMA port, enter the dspport <ifnum> command as follows:
M8830_CH.1.PXM.a >
dspport
1
Interface Number : 1
Line Number : N/A IMA Group Number : 2.1
Admin State : Up Operational State : Up
Guaranteed bandwidth(cells/sec): 14367 Number of partitions : 1
Maximum bandwidth(cells/sec) : 14367 Number of SPVC : 0
ifType : NNI Number of SPVP : 0
VPI number (VNNI, VUNI) : 0 Number of SVC : 4
MIN VPI (EVNNI, EVUNI) : 0 MAX VPI (EVNNI, EVUNI): 0
SCT Id (Conf./InUse) : 6/6
F4 to F5 Conversion : Disabled
The IMA Group Number row identifies this port as an IMA port.
vpi
Virtual path identifier for a virtual port of VUNI or VNNI type. The ranges are as
follows:
•
VNNI Range: 1-4095
•
VUNI Range: 1-255
minvpi
Minimum virtual path identifier for a virtual port of EVUNI or EVNNI type. The ranges
are as follows:
•
EVUNI, Range: 0-255
•
EVNNI, Range: 0-4095
maxvpi
Maximum virtual path identifier for a virtual port of EVUNI or EVNNI type. The
ranges are as follows:
•
EVUNI, Range: 0-255
•
EVNNI, Range: 0-4095
Table 3-7
Parameters for addimaport Command (continued)
Parameter
Description
