8-42
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Chapter 8 Managing PNNI Nodes and PNNI Routing
Managing Connection Grooming
-awrtvbr
Use the -awrtvbr option to set thresholds for the grooming rtVBR
connections based on cumulative AW. When the type parameter is set to
per, the range is 0 to 100 percent. When the type parameter is set to abs,
the range is 0 to 4294967295. The default values are percentage
reduction = 30 and absolute cost = 0.
-awnrtvbr
Use the -awnrtvbr option to set thresholds for the grooming nrtVBR
connections based on cumulative AW. When the type parameter is set to
per, the range is 0 to 100 percent. When the type parameter is set to abs,
the range is 0 to 4294967295. The default values are percentage
reduction = 30 and absolute cost = 0.
-awubr
Use the -awnrtvbr option to set thresholds for the grooming UBR
connections based on cumulative AW. When the type parameter is set to
per, the range is 0 to 100 percent. When the type parameter is set to abs,
the range is 0 to 4294967295. The default values are percentage
reduction = 30 and absolute cost = 0.
-awabr
Use the -awabr option to set thresholds for the grooming ABR
connections based on cumulative AW. When the type parameter is set to
per, the range is 0 to 100 percent. When the type parameter is set to abs,
the range is 0 to 4294967295. The default values are percentage
reduction = 30 and absolute cost = 0.
-ctdcbr
Use the -ctdcbr option to set thresholds for the grooming CBR
connections based on cell transfer delay. When the type parameter is set
to per, the range is 0 to 100 percent. When the type parameter is set to
abs, the range is 0 to 4294967295. The default values are percentage
reduction = 30 and absolute cost = 0.
-ctdrtvbr
Use the -ctdrtvbr option to set thresholds for the grooming rtVBR
connections based on cell transfer delay. When the type parameter is set
to per, the range is 0 to 100 percent. When the type parameter is set to
abs, the range is 0 to 4294967295. The default values are percentage
reduction = 30 and absolute cost = 0.
-cdvcbr
Use the -cdvcbr option to set thresholds for the grooming CBR
connections based on cell transfer delay. When the type parameter is set
to per, the range is 0 to 100 percent. When the type parameter is set to
abs, the range is 0 to 4294967295. The default values are percentage
reduction = 30 and absolute cost = 0.
-cdvrtvbr
Use the -cdvrtvbr option to set thresholds for the grooming rtVBR
connections based on cell delay variation. When the type parameter is set
to per, the range is 0 to 100 percent. When the type parameter is set to
abs, the range is 0 to 4294967295. The default values are percentage
reduction = 30 and absolute cost = 0.
Table 8-14 Parameters for cnfrteoptthresh Command (continued)
