SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
226
B
Voice tab > Regional page
Distinctive Ring Patterns section
SIT3 Tone
Alternative to the Reorder Tone played when an error occurs
as a caller makes an outbound call. The RSC to trigger this
tone is configurable on the SIP
screen.
Default:
914@-16,1371@-16,1777@-16;20(.380/0/1,.380/
0/2,.380/0/3,0/4/0)
SIT4 Tone
This an alternative to the Reorder Tone played when an error
occurs as a caller makes an outbound call. The RSC to trigger
this tone is configurable on the SIP
screen.
Default:
985@-16,1371@-16,1777@-16;20(.380/0/1,.274/
0/2,.380/0/3,0/4/0)
MWI Dial Tone
Played instead of the Dial Tone when there are unheard
messages in the caller’s mailbox.
Default:
350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Cfwd Dial Tone
Played when all calls are forwarded.
Default:
350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
Holding Tone
Informs the local caller that the far end has placed the call on
hold.
Default:
600@-19*(.1/.1/1,.1/.1/1,.1/9.5/1)
Conference Tone
Played to all parties when a three-way conference call is in
progress.
Default:
350@-19;20(.1/.1/1,.1/9.7/1)
Secure Call Indication
Tone
Played when a call has been successfully switched to secure
mode. It should be played only for a short while (less than 30
seconds) and at a reduced level (less than -19 dBm) so it
does not interfere with the conversation.
Default:
397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
Feature Invocation Tone
Played when a feature is implemented.
Default:
350@-16;*(.1/.1/1)
Ring1 Cadence
Cadence script for distinctive ring 1.
Default:
60(2/4)
Ring2 Cadence
Cadence script for distinctive ring 2.
Default:
60(.8/.4,.8/4)
Downloaded from
www.Manualslib.com
manuals search engine
