Purpose
Command or Action
Installs the evaluation license obtained in the previous steps.
license install stored-location-url
Step 4
Example:
license install
bootflash:90NVHJ3C26E_20140724194119019.lic
•
Accept the End-User License Agreement when prompted.
Enters global configuration mode.
configure terminal
Example:
configure terminal
Step 5
Activates the evaluation license on the Cisco CSR 1000v upon the
next reload.
license boot level {ax | appx
}
Example:
license boot level ax
Step 6
Select
ax
if installing the AX feature set evaluation license. Select
appx
if installing the APPX feature set evaluation license. Accept
the end user license agreement when it is prompted.
Exits global configuration mode.
end
Example:
end
Step 7
Saves the running configuration to NVRAM.
write memory
Example:
write memory
Step 8
Restarts the Cisco CSR 1000v to enable the feature set and the
maximum throughput supported by the evaluation license. The
reload
Example:
reload
Step 9
Cisco CSR 1000v reloads with the evaluation license activated.
The evaluation license expires 60 days from the time it is activated.
Displays the license information.
show license detail
Example:
show license detail
Step 10
What to Do Next
If you are installing an evaluation license for a feature set with a maximum throughput of 10 Gbps, then
additional configuration is required to support the 10 Gbps interface. See
Configuring an Interface for 10
Gbps Maximum Throughput, on page 161
.
Note
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
158
Installing Cisco CSR 1000v Licenses
Installing CSL Evaluation Licenses for Cisco IOS XE 3.13S and Later
