What to Do Next
As an alternative to subscribing to individual alert groups, you can subscribe to all alert groups by entering
the
subscribe-to-alert-group all
command. However, entering this command causes a large number of
syslog messages to generate. We recommend subscribing to alert groups individually, using appropriate
severity levels and patterns when possible.
Note
Periodic Notification
When you subscribe a destination profile to the Configuration, Inventory, or Snapshot alert group, you can
choose to receive the alert group messages asynchronously or periodically at a specified time. The sending
period can be one of the following:
•
Daily
—
Specifies the time of day to send, using an hour:minute format hh:mm, with a 24-hour clock
(for example, 14:30).
•
Weekly
—
Specifies the day of the week and time of day in the format day hh:mm, where the day of the
week is spelled out (for example, Monday).
•
Monthly
—
Specifies the numeric date, from 1 to 31, and the time of day, in the format date hh:mm.
•
Interval
—
Specifies the interval at which the periodic message is sent, from 1 to 60 minutes.
•
Hourly
—
Specifies the minute of the hour at which the periodic message is sent, from 0 to 59 minutes.
Hourly and by interval periodic notifications are available for the Snapshot alert group only.
Note
Message Severity Threshold
When you subscribe a destination profile to the Syslog alert group, you can set a threshold for the sending of
alert group messages based on the level of severity of the message. Any message with a value lower than the
destination profile specified threshold is not sent to the destination.
The severity threshold is configured using the keywords in
Table 33: Severity and Syslog Level Mapping ,
on page 245
and ranges from catastrophic (level 9, highest level of urgency) to debugging (level 0, lowest
level of urgency).
Other alert groups do not allow setting a threshold for severity.
Call Home severity levels are not the same as system message logging severity levels.
Note
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
244
Configuring Call Home for the Cisco CSR 1000v
Periodic Notification
