DETAILED STEPS
Step 1
Click
Add Hardware
.
Step 2
Select the
Serial
option from the menu.
Step 3
From the
Device type
drop-down menu, select
TCP net console (tcp)
.
Step 4
Specify the port number, and select the
Use Telnet
checkbox.
Step 5
Click
Finish
.
Step 6
After adding all necessary hardware, click
Begin Installation
.
Creating the Cisco CSR 1000v VM Using virt-manager--Add Hard Disk
Describes the optional steps after selecting
Customize configuration before install
.
Before You Begin
•
Perform the task
Creating a Bootstrap Day0 Configuration for virt-manager, on page 119
—
Using .qcow2
or .iso Image, but during the task steps before clicking "Finish", select the
Customize configuration
before install
option . A screen with "Add Hardware" button appears.
SUMMARY STEPS
1.
Click
Add Hardware
.
2.
Select the
Storage
option from the menu.
3.
Select
Select managed or other existing storage
checkbox.
4.
(Applicable only when adding a Bootstrap Day0 configuration) Click the
Browse
button and navigate to
the
csr_config.iso
location. From the
Device type
drop-down menu, select the
IDE CDROM
option.
5.
Click
Finish
.
6.
After adding all necessary hardware, click
Begin Installation
.
DETAILED STEPS
Step 1
Click
Add Hardware
.
Step 2
Select the
Storage
option from the menu.
Step 3
Select
Select managed or other existing storage
checkbox.
Step 4
(Applicable only when adding a Bootstrap Day0 configuration) Click the
Browse
button and navigate to the
csr_config.iso
location. From the
Device type
drop-down menu, select the
IDE CDROM
option.
Step 5
Click
Finish
.
Step 6
After adding all necessary hardware, click
Begin Installation
.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
118
Installing the Cisco CSR 1000v in KVM Environments
Creating the Cisco CSR 1000v VM Using the virt-manager GUI Tool
