Cisco CSR 1000v Series Software Configuration Manual Download Page 108

Page: 108 / 314

For VMware requirements for earlier versions of Cisco IOS XE (before IOS XE Denali 16.3.1) see

VMware

Requirements

—

Cisco IOS XE 3.x, on page 97

and

VMware VM Requirements

—

Cisco IOS XE 3.x,

on page 99

Note

VMware vSphere Web Client. The following versions of VMware vSphere Web Client are supported:

•

VMware vSphere Web Client 6.0

•

VMware vSphere Web Client 5.5

VMware vCenter Server. The following versions of VMware vCenter Server are supported:

•

VMware ESXi 6.0 update 2 (instance running vm11). This version is recommended. This version has
been fully tested and meets performance benchmarks.

•

VMware ESXi 5.5 update 3 (instance running vm10). This version is supported. However, note that
version 6.0 update 2 is recommended

VMware vCenter

—

installation tool.

VMware vSwitch

—

standard or distributed vSwitches are supported.

Hard Drive

—

only a single hard disk drive is supported. Multiple hard disk drives on a VM are not supported.

Virtual Disk

—

a 8 GB virtual disk is supported.

vCPUs

—

the following vCPU configurations are supported:

The required vCPU configuration depends on the throughput license and technology package installed.
For more information, see the data sheet for your release.

Note

•

1 vCPU: requires minimum 4 GB RAM allocation

•

2 vCPUs: requires minimum 4 GB RAM allocation

•

4 vCPUs: requires minimum 4 GB RAM allocation

•

8 vCPUs: requires minimum 4 GB RAM allocation

Virtual CPU core

—

one virtual CPU core is required. This needs a 64-bit processor with Virtualization

Technology (VT) enabled in the BIOS setup of the host machine.

Virtual hard disk space

—

minimum 8 GB size is required.

Virtual Network Interface Cards (vNICs)

—

Three or more vNICs (max. 10)

—

VMXNET3

—

are supported.

A default video, SCSI controller set is required, and an installed virtual CD/DVD drive.

VMware Requirements

—

Cisco IOS XE Denali 16.3

The VMware tools supported by Cisco CSR 1000v using Cisco IOS XE 16.3.x are as follows:

Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide

Installing the Cisco CSR 1000v in VMware ESXi Environments

VMware Requirements

—

Cisco IOS XE Denali 16.3

Summary of Contents for CSR 1000v Series



























































































































































































































































































































Search results

Summary of Contents for CSR 1000v Series

Reviews:

Related manuals for CSR 1000v Series

Brands by name

Popular brands

Cisco CSR 1000v Series, Software Configuration Manual

Search results

Summary of Contents for CSR 1000v Series

Reviews:

Related manuals for CSR 1000v Series

Brands by name

Popular brands