Step 5
When prompted, enter the filename as you want it to appear on the router. Typically, the same filename is entered as
was used in the previous step.
Example:
Destination filename ? csr1000v-universalk9.03.10.00.S.153-3.S-ext.SPA.bin
Step 6
If an error message appears that says,
“
Not enough space on device,
”
do the following:
•
If you are certain that all the files in bootflash memory should be erased, enter
y
when prompted twice to confirm
that bootflash memory will be erased before copying:
Example:
Accessing tftp://10.10.10.2/csr1000v-universalk9.03.10.00.S.153-3.S-ext.SPA.bin...
Erase bootflash: before copying? [confirm]
y
Erasing the flash filesystem will remove all files! Continue? [confirm]
y
Erasing device...
•
If you are not certain that all files in bootflash memory should be erased, press
Ctrl-Z
.
Step 7
If the error message does not appear, enter
no
when prompted to erase the bootflash memory before copying:
Example:
Accessing tftp://10.10.10.2/csr1000v-universalk9.03.10.00.S.153-3.S-ext.SPA.bin...
Erase bootflash: before copying? [confirm]
no
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
204
Upgrading the Cisco IOS XE Software
Using TFTP or Remote Copy Protocol to Copy the System Image into Boot Flash Memory
