•
We recommend that you install the broadband feature license before installing any memory add-on
licenses.
•
The VM must have enough memory allocated to accommodate the additional memory. See
the Cisco CSR 1000v Memory Allocation, on page 162
for more information.
For more information about configuring broadband support, see
Broadband Access Aggregation and DSL
and
Intelligent Services Gateway Configuration Guide
Installing Broadband Feature License
SUMMARY STEPS
1.
Obtain the PAK.
2.
enable
3.
show license udi
4.
Convert the PAK to a license by entering the PAK and the UDI into the Cisco Product License registration
portal
http://www.cisco.com/go/license
5.
show platform software vmemory info
6.
configure terminal
7.
platform broadband
{
1K
|
2K
|
3K
|
4K | 5K | 6K | 7K | 8K
}
8.
platform memory add memory
9.
end
10.
license install
stored-location-url
11.
write memory
12.
reload
13.
show license detail
14.
show platform software vmemory info
15.
(Optional) Install memory add-on licenses as needed. See
Installing Memory Add-on License, on page
163
.
DETAILED STEPS
Purpose
Command or Action
The PAK is provided to you when you order or purchase the right
to use a feature set.
Obtain the PAK.
Step 1
•
The PAK serves as a receipt and is used as part of the
process to obtain a license.
Enables privileged EXEC mode.
enable
Step 2
Example:
Router> enable
•
Enter your password if prompted.
Displays all the UDI values that can be licensed in a system.
show license udi
Step 3
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
167
Installing Cisco CSR 1000v Licenses
Installing CSL Feature Add-on Licenses for Cisco IOS XE 3.13S and Later
