•
The base feature license must be installed.
•
The VM must have enough memory allocated to accommodate the additional memory. See the table in
Understanding the Cisco CSR 1000v Memory Allocation, on page 162
for more information.
SUMMARY STEPS
1.
Obtain the PAK.
2.
enable
3.
show license udi
4.
Convert the PAK to a license by entering the PAK and the UDI into the Cisco Product License registration
portal:
http://www.cisco.com/go/license
5.
show platform software vmemory info
6.
configure terminal
7.
platform memory add memory
8.
end
9.
license install stored-location-url
10.
write memory
11.
reload
12.
show license detail
13.
show platform software vmemory info
DETAILED STEPS
Purpose
Command or Action
The PAK is provided to you when you order or purchase the
right to use a feature set.
Obtain the PAK.
Step 1
•
The PAK serves as a receipt and is used as part of the
process to obtain a license.
Enables privileged EXEC mode.
enable
Step 2
Example:
Router> enable
•
Enter your password if prompted.
Displays all the UDI values that can be licensed in a system.
show license udi
Step 3
Example:
Router# show license udi
•
You need the UDI of the device as part of the process
to obtain a license.
After entering the appropriate information, you will receive
an e-mail containing the license information that you can use
to install the license:
Convert the PAK to a license by entering the PAK and
the UDI into the Cisco Product License registration
portal:
http://www.cisco.com/go/license
Step 4
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
164
Installing Cisco CSR 1000v Licenses
Installing CSL Feature Add-on Licenses for Cisco IOS XE 3.13S and Later
