E-10
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Appendix E Configuring the Client Adapter through the Windows XP Operating System
Configuring the Client Adapter
Enabling EAP-TLS Authentication
Follow the steps below to prepare the client adapter to use EAP-TLS authentication, provided you have
completed the initial configuration.
Step 1
Click the Authentication tab on the Wireless Network Properties screen. The following screen appears
(see
Figure E-3
).
Figure E-3
Wireless Network Properties Screen (Authentication Tab)
Step 2
Check the Enable IEEE 802.1x authentication for this network check box if you did not enable WPA
or WPA-PSK on the Association screen.
Step 3
For EAP type, select Smart Card or other Certificate.
Step 4
Click Properties. The Smart Card or Other Certificate Properties screen appears (see
Figure E-4
).
