9-13
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Chapter 9 Routine Procedures
Client Adapter Software Procedures
Exiting ACU
To exit ACU, select Exit from the Commands drop-down menu (see
Figure 9-6
).
Figure 9-6
Commands Drop-Down Menu
Modifying ACU Installation Settings
If you need to change any of the settings that you selected during installation (for example, placing the
ACU icon on the desktop or allowing a saved LEAP username and password), you must run the Install
Wizard again and modify the parameter values. Refer to
Chapter 3
for instructions.
Finding the Version of ACU
Follow the instructions in this section to find the version of ACU that is currently installed.
Step 1
Open ACU.
Step 2
Click the About icon or select the About Aironet Client Utility option from the Help drop-down menu.
The About Aironet Client Utility screen appears (see
Figure 9-7
).
