10-9
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Chapter 10 Troubleshooting
Troubleshooting the Client Adapter
Resolving Resource Conflicts in Windows NT
Step 1
Select Start > Programs > Administrative Tools > Windows NT Diagnostics.
Step 2
Click the Resources tab.
Step 3
Click the IRQ button.
Step 4
The used IRQs are listed in numerical order along the left side of the Resources window. Write down the
number of an IRQ that is not being used; you will need it for Step 11.
Step 5
Click the I/O Port button.
Step 6
The used I/O ranges are listed in numerical order along the left side of the Resources window under
Address. Write down an I/O range that is not being used (for example, if range 0100-013F is followed
by 0170-0177 in the list, then 0140-0169 is an available range); you will need it for Step 13.
Step 7
Double-click My Computer, Control Panel, and Network.
Step 8
Click the Adapters tab and select the Cisco Aironet Wireless LAN Adapter.
Step 9
Click Properties.
Step 10
Select Interrupt under Property.
Step 11
Select the number of the unused interrupt from Step 4 in the Value drop-down box.
Step 12
Select IO Base Address under Property.
Step 13
Select a value that is within the unused range you determined in Step 6. For example, if your unused
range is 0140-0169, you could select 0150.
Step 14
Click OK.
Resolving Resource Conflicts in Windows 2000
Step 1
Double-click My Computer, Control Panel, and System.
Step 2
Click the Hardware tab and Device Manager.
Step 3
Double-click Network Adapters and the Cisco Systems Wireless LAN Adapter.
Step 4
In the General screen, the Device Status field indicates if a resource problem exists. If a problem is
indicated, click the Resources tab.
Step 5
Uncheck the Use automatic settings check box.
Step 6
Under Resource Settings or Resource Type, click Input/Output Range.
Step 7
Look in the Conflicting Device list at the bottom of the screen. If it indicates that the range is being used
by another device, click the Change Setting button.
Step 8
Scroll through the ranges in the Value dialog box and select one that does not conflict with another
device. The Conflict Information window at the bottom of the screen indicates if the range is already
being used.
Step 9
Click OK.