5-42
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Chapter 5 Configuring the Client Adapter
Setting Network Security Parameters
Windows XP
Follow these steps to enable WPA in Windows XP Service Pack 1 and Microsoft support patch 815485.
Step 1
Select the Wireless Networks tab on the Wireless Network Connection Properties screen. The following
screen appears (see
Figure 5-8
).
Figure 5-8
Wireless Network Connection Properties Screen (Wireless Networks Tab)
Step 2
Make sure that the Use Windows to configure my wireless network settings check box is checked.
Step 3
Select the SSID of the profile you began setting up in ACU from the list of available networks and click
Configure. If your profile’s SSID is not listed, click Add. The Wireless Network Properties screen
appears (see
Figure 5-9
).