7-14
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Chapter 7 Performing Diagnostics
Viewing Statistics for Your Client Adapter
Partial Packets Received
The number of fragments that were discarded because the entire
packet was not received successfully.
SSID Mismatches
The number of times the client adapter tried to associate to an
access point but was unable to because the adapter’s SSID was not
the same as the access point’s.
AP Mismatches
The number of times the client adapter tried to associate to an
access point but was unable to because the access point was not
the adapter’s specified access point.
Note
Refer to the Specified Access Point 1- 4 parameter in
Table 5-4
for information on specifying access points.
Data Rate Mismatches
The number of times the client adapter tried to associate to an
access point but was unable to because the adapter’s data rate was
not supported by the access point.
Note
Refer to the Data Rate parameter in
Table 5-3
for
information on supported data rates.
WPA Mismatches
The number of probe responses or beacons received that do not
qualify for association because of a mismatched WPA
information element. WPA information elements are sent by
access points to advertise supported authentication modes and
supported ciphers.
Note
This field is displayed only if WPA is enabled.
Authentication Rejects
The number of times the client adapter tried to authenticate to an
access point but was rejected.
Authentication Time-out
The number of times the client adapter tried to authenticate to an
access point but was unable to because the access point did not
respond fast enough (timed out).
Association Rejects
The number of times the client adapter tried to associate to an
access point but was rejected.
Association Time-out
The number of times the client adapter tried to associate to an
access point but was unable to because the access point did not
respond fast enough (timed out).
Packets Aged
The number of packets received successfully but discarded by the
client adapter because either all fragments were not received
within 10 seconds or the host did not read the packet from the
adapter within 10 seconds.
Packets MIC OK
The number of packets that were received successfully with a
valid message integrity check (MIC).
Note
This field is displayed only if MIC is enabled on the
access point.
Packets No MIC
The number of packets that were discarded because no MIC was
found.
Note
This field is displayed only if MIC is enabled on the
access point.
Table 7-4
Client Adapter Statistics (continued)
Statistic
Description
