6.0 MENU AND PICTURE SETTINGS
R599790 - FORCE Series User Manual
41
of key presses.
Slide bars in menus
The current value for a given parameter, such as size or vertical stretch, appears to the left of its slide bar icon
(adjustment window). This number often expresses a percentage, or it may have units associated with it (such as
pixels), depending on the specific option. Press LEFT/RIGHT ARROW KEY to gradually adjust the setting up or
down—both the number and the length of the bar change accordingly. Hold for continuous adjustment. Or press
ENTER to activate a slide bar text box for specific number entry via the Keypad and then press ENTER.
Slide Bar
Direct slide Bars
For quick access, to Gamma, Brightness, and Contrast slide bars without traveling the menu system. Press
Gamma, Brightness, or Contrast to display the contrast slide bar.
Use the arrow keys to adjust a direct slide bar, or press ENTER and enter a specific number from the keypad, then
ENTER or LEFT ARROW KEY or RIGHT ARROW KEY to save (or EXIT to cancel). When you are done, press
EXIT to save and return to your presentation.
NOTES: 1) You can still adjust a direct slide bar as usual if the display is turned off (see OSD or Menu Preferences
menu) — the slide bar just won’t be visible. 2) A direct slide bar disappears if it is not used within five seconds.
Check box
Conditions are present if its adjacent check box contains a checkmark. To toggle the check box, highlight and press
ENTER, or highlight and use RIGHT ARROW KEY to check and LEFT ARROW KEY to uncheck. If a check box
is numbered, enter its number to immediately toggle the check box.
Check Box
Pull-down lists
To see a pull-down list of options available for a given parameter:
•
Highlight the list and press ENTER; or
•
Enter the menu option number
Use the UP ARROW KEY or DOWN ARROW KEY to navigate up and down within the list. Press ENTER to choose
an option from the list.
Pull-Down List
If you prefer to quickly scroll through a list without first pulling it down, highlight the option and use LEFT ARROW
KEY or RIGHT ARROW KEY. Press ENTER when the desired choice appears. NOTES: 1) Press LEFT ARROW
KEY or RIGHT ARROW KEY to jump between pages in an extra long pull-down list. 2) Press EXIT while in a pull-
down list to cancel any change.
Editing Text
Activate the Edit Window:
To enter or edit text, highlight the desired parameter (such as a channel name) and press ENTER to activate its
adjacent edit window. Any previously entered text is displayed with its first character highlighted in a square cursor,
signifying that this character is ready for editing.
Navigate Within the Edit Window
Filter 5
5. Broadcast Keys
Communications
1. Serial (RS-232 IN) Options
2. Serial (RS-232 OUT) Options
3. Serial (RS-422) Options
4. Projector Address
5. Network Routing
6. Ethernet Settings
7. Broadcast Keys
8. Front IR Enabled
Seperate
9. Rear IR Enabled
10. Wired Keypad Enabled
11. DMX/ArtNet Settings
1. Seperate
2. RS-232 and RS-422 Joined
3. RS-232 and Ethernet Joined
4. All Joined
Summary of Contents for Force one
Page 1: ......
Page 99: ...16 0 APPENDIX DIMENSIONS R599790 FORCE Series User Manual 99...
Page 100: ......
