3.0 GETTING STARTED
R599790 - FORCE Series User Manual
17
3.0 GETTING STARTED
3.1
General View
Rear Side view
• Built-in Keypad
The built-in keypad is located on the side of the projector. Use it similarly to the IR remote to control the projector.
An LCD display is located above the keypad for displaying projector status.
• AC receptacle
The AC receptacle is located at the back of the projector. Use this receptacle to plug in an appropriately rated line
cord. The power switch is located above the AC receptacle.
• Cooling and air vents
There are numerous air vents located around the projector. It is important these vents remain unobstructed.
Adequate airflow through the projector will prevent it from overheating.
• Lamp door
The lamp doors are located at the side of the projector, which provides easy access to the lamp module for
replacement. Refer to “Replacing the Lamps”, page 80. The lamp doors are fitted with safety interlocks which
switch the lamp off when the door is opened. The lamp doors are provided with clear windows to indicate when the
lamps are on.
• Input panel Slots
All source connections are made to the input panel located at the back of the projector. Any of the available optional
input cards can be installed in the 4 option card slots. The slots are labelled 1 through 4.
Front view
Projection lens
Built-in Keypad
with LCD screen
Lamp doors
Cooling air vents
Adjustable foot
AC receptacle
Input panel Slots
LEDs
Rear IR sencor
Adjustable foot
Adjustable foot
Projection lens
Front IR sensor
Summary of Contents for Force one
Page 1: ......
Page 99: ...16 0 APPENDIX DIMENSIONS R599790 FORCE Series User Manual 99...
Page 100: ......
