Cineversum Force one, User Manual, Page: 16 / 100

2.0 INSTALLATION GUIDELINES
16 R599790 - FORCE Series User Manual
or if the lens will not focus over the correct range of throw distances, then the boresight requires coarse
adjustment, go to step 8.
8) The original factory boresight can be recovered approximately by positioning the 3 setscrews. Position the
setscrews flush with the front face of the lens mount plate and in contact with the inner lens mount plate. This may
require adjusting both setscrews and capscrews.
9) If further action is required. Repeat step 2.
10) Lock the setscrews, and re-check the boresight quality. Tighten the setscrew enough to ensure they will not
shift.
2.12 Powering Down
The projector can be powered down by using one of the following methods:
Remote Keypad/Built-In Keypad
• Press and hold [POWER] or press [POWER] twice
OR
• Press POWER once, then immediately press the DOWN key and confirm
Web User Interface (UI)
• From the Main Tab, Select Power>OFF. NOTE: A window will display for confirmation on powering down.
• Select Yes.
After powering down, the Status LEDs cycle and the LCD displays the message “Cooling Down”, until cool
down is complete. Do not unplug the projector during the cool down cycle.