Cineversum Force one, User Manual, Page: 12 / 100

2.0 INSTALLATION GUIDELINES
12 R599790 - FORCE Series User Manual
Maximum vertical and horizontal offsets
Note: These values depend of the projection lens used. Refer to chart below or ask your dealer for more
information.
The horizontal position of the image can also be offset. The image is moved to the left or right of optical center. The
amount of horizontal offset available depends on the lens installed and if the image has already been vertically
offset. Horizontal offset can be expressed as the percent the image width or the number of pixels of shift to one side
of lens center.
2.8 Ceiling mounting the unit
The projector can be inverted and suspended from the ceiling using a specially designed ceiling mount fixture. This
mounting is recommended for those that want the projector out of plain view or have limited amount of space for the
projector.
When mounting, make use of the 6 screw holes (M8x20 screws) at the bottom of this unit indicated by the
letter A. Allow sufficient space around the air inlets to avoid blocking them
.
Absolute HD lenses Vertical Offset
Lens model Offset in pixels Offset in %
Fixed 0.67:1 (R9841110) ±189 px ±35%
Zoom 1.16-1.49:1 (R9841110) ±551 px ±51%
All other lenses ±643 px ±60%
Absolute HD lenses Horizontal Offset
Lens model Offset in pixels Offset in %
Fixed 0.67:1 (R9841110) ±115 px ±6%
Zoom 1.16-1.49:1 (R9841110) ±384 px ±20%
All other lenses ±403 px ±21%
Offsets are subject to ±4% centering tolerance.
60% x Height
21% x Base
Base Screen (B)
Screen Height