CIM MDM 1000, Operator'S Manual

Page: 92 / 100

C-92 METAL DOT MATRIX REV. 04.2002
C LCD EDIT
OPERATORS MANUAL
C.9 DESIGNING INDIVIDUAL FIELDS
LCD-15 will be displayed independently of any
'Y' selected options in the top line of
LCD-14 .
Step-1: Naming a Field
NAME: AA
Type in the name (HOSP) and Enter
Eight digits maximum and overwrite any existing
letters of the previous name that may be longer
than the new name.
Step-2: Entering the Y Coordinate of the
field.
Y: 028
The Y Coordinate is defined as the distance of the
bottom of the field to the top of the card. The
stamper can be set up for either inches or metric
measurements.
Examples: 1.5 inches = 150, 0.75 inches = 075, 0.3
inches = 030
Type in the three digit value and press
ENTER
.
Step-3: Entering the X Coordinate of the
field.
X: 023
The X coordinate is defined as the distance of the
left most character in the field from the left margin
of the card. The stamper can be set up for either
inches or metric meaurements.
Examples: 3 inches = 300, 2.25 inches = 225, 0.7
inches = 070
Type in the three digit value and press
ENTER
.
Step-4: Enter Character Spacing Required
COST: 07
Character spacing is defined on pages 9 and 10
of this manual. The normal standard spacing is
set at cost of 07 for 10 characters per inch. The
OCR spacing is set at cost of 10 for 7 characters
per inch.
Enter cost value and press
ENTER
.
REV. 05-2008