A-70
METAL DOT MATRIX
REV. 04.2002
A THE MACHINE'S SETUP
OPERATORS MANUAL
A.11 RESET OF PARAMETERS
Sometimes electrical disturbs could modify the
value of critical parameters causing errors and
malfunctions of the machine.
Following this procedure all the parameters are
resetted to the default values and many broblems
could be solved.
Type
SET UP
in sequence
to reset all the setup.
Type
SET UP
STAMP
MODE
STAMP
MODE
in sequence
to reset the configuration parameters.
ATTENTION: After this operation you have to
manually restore all the paremeters that you can
find in the sample cards attached to the machine
(see chap. A4-A10 to know how to modify the
parameters).
REV. 05-2008
Summary of Contents for MDM 1000
