6-46
METAL DOT MATRIX
REV. 04.2002
6 MAINTENANCE
OPERATORS MANUAL
Fig. 6.4
Fig. 6.5
1
6.3.3 STAMPING UNIT
NEVER USE OIL OR OTHER KIND OF
LUBRICANTS ON THE PIN (1) OF THE
SOLENOID
6.4 UNLOADER LIFTER
Oil with vaseline the unloader lifter's vertical
guide.
6.5 SAFETY INTERLOCK SWITCH FUNCTIONAL TEST
To work in safe condition it is necessary that the
interlock switch of the cover works properly.
Before to start the work session (at least one time
per day) open the top cover and verify tha the
machine switch in PAUSE mode. Then close the
covers and press start to resume the job. If the
machine dosen't switch in PAUSE status it means
that the interlock switch is demaged. In this case
please switch off the machine and call the service.
REV. 05-2008
Summary of Contents for MDM 1000
