CIM MDM 1000, Operator'S Manual

Page: 31 / 100

4-31
METAL DOT MATRIX REV. 04.2002
OVERALL DESCRIPTION 4
OPERATORS MANUAL
Fig. 4.6
4.3 STORED CONFIGURATION AND REPLACING
LITHIUM BATTERY
The LCD EDIT format and the SETUP configuration
parameters (see Annex A and B) are stored into
a memory provided of a lithium backup battery.
When the battery level is down the machine may
lost the configuration and the LCD Edit formats.
Before this critical level is reached, the display will
show the alarm "BATT LOW" (see Figure) and the
red lamp will flash for 5 seconds.
In this case call the service in order to replace the
battery.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. REPLACE ONLY WITH
THE SAME OR EQUIVALENT TYPE RECOMMENDED
BY THE MANUFACTURER. DISPOSE OF USED
BATTERIES ACCORDING TO THE MANUFACTURER’S
INSTRUCTIONS
REV. 05-2008