CIM MDM 1000, Operator'S Manual

Page: 82 / 100

C-82 METAL DOT MATRIX REV. 04.2002
C LCD EDIT
OPERATORS MANUAL
C.6 EDIT STAMPED CARDS
The data of the last card embossed can be
recalled by pressing
F 1
. New data can
overwrite the previous data. This includes all
fields even if the fields have protected data.
The data of the last card of all the formats is
saved. The data of the last card embossed of any
format can be recalled by pressing
F 4
, Format
#,
F 1
.
Data can be changed, this includes any protected
data. This edited card can then be embossed by
pressing
F 10
. The second time
F 1
is pressed
or the stamping of the edited message, will return
the system back to the original off-line data entry
mode.
If an error condition occurs the stamper' s LCD
will display the problem and the action to be
taken by the operator. The section on display
messages and keypad operations in Section 2 of
this manual will give further information on
messages and operator intervention.
REV. 05-2008