CIM MDM 1000, Operator'S Manual

Page: 40 / 100

5-40 METAL DOT MATRIX REV. 04.2002
5 HOW TO PRODUCE ONE CARD
OPERATORS MANUAL
Fig. 5.12
Fig. 5.13
Fig. 5.11
5.4 RUN THE PROGRAM AND PRODUCE ONE CARD
As soon as the stamper , the Software and the
serial connection to the Host computer have
been succesfully installed, card production can
be started.
Switch on the machine and press the START key
on the front panel when ready.
Load an appropriate number of plate in the
loader (max. 200 for 2000 model) or put the plate
in the right side load opening (1000 model) and
close the top door.
Select the shortcut from the Program menu of
your PC to run SWORD (fig. 5-11).
The windows shown in fig. 5.12 will appear on
your PC.
The square in center of the windows represents
the layout of your plate.
To modify the dimensions of the plate press the
"TARGHETTE" button.
To set the the software in order to use your METAL
DOT MATRIX press the SETUP button and OK in the
following Password window (fig. 5.13).
Select TIPO DI MACCHINA= METAL DOT MATRIX
and press "Salva".
REV. 05-2008