A-61
REV. 04.2002
METAL DOT MATRIX
THE MACHINE'S SETUP A
OPERATORS MANUAL
A.7 PROTOCOLS SETTINGS
This menu permits to customize the value of the
typical parameters of the comunication between
machine and pc. in particular, if a comunication
protocol which differs from the default is to be
used, it will be necessary to modify this setup.
The parameters of the menu are described below:
Choose this menu.
PROTOCOLS
Press
ENTER
The following list of Protocols are displayed.
CHOISE OF THE PROTOCOL (CIM)
(CIM, XON, MUL)
Using the numeric keys and choose the
corrisponding Protocols
1 selects the protocol
CIM
2 selects the protocol
XON
-
XOFF
3 selects the protocol
MULTI EMBOSSER
Press
START OF THE TEXT
SELECTION (000-121)
(002)
STX
the value
of Start of Text (002-STX-Start of Text)
.
Press
END OF TEXT
SELECTION (000-121)
(003)
ETX
the value
of End of Text (003-ETX-End of Text)
.
Press
REV. 05-2008
Summary of Contents for MDM 1000
