A-58
METAL DOT MATRIX
REV. 04.2002
A THE MACHINE'S SETUP
OPERATORS MANUAL
A.4 CONFIGURATION PARAMETERS
The configuration parameters menu enables the
setting of the following general parameters of
the machine.
The parameters of the menu are described below:
Choose this menu.
Press
ENTER
YES: selection cause the block of the machine
when the unloader unit is full.
Press
YES: after each feed of the card the pusher come
back to the home position.
Press
Number of retry in reproducing the card in case
of errors.
Press
ESC
twice to terminate the setup and to
return to the READY state.
UNLOADER FULL ALARM
(YES/NO)
PUSHER HOME
(YES/NO)
CARD ERROR REPETITION
(0-9)
(0)
CONFIGURATION PARAMETERS
REV. 05-2008
Summary of Contents for MDM 1000
