CIM MDM 1000, Operator'S Manual

Page: 7 / 100

0-7
METAL DOT MATRIX REV. 04.2002
FOREWORD 0
OPERATORS MANUAL
0.1 USING THE WORKSHOP MANUAL
0.1.1 Importance of the manual
This manual contains the instruction for putting
into service, using and maintainance of the METAL
DOT MATRIX SERIES, AUTOMATIC (METAL DOT
MATRIX 2000) and MANUAL (METAL DOT MATRIX
1000) .
Before to install and put into service the machine
we recommend that you carefoully read all the
instructions in this manual, with particular reference
to chapters1,2 and 3, as the effectiveness of any
servicing operation depends on the correct and
methodical application of the information
contained herein.
If you run into difficulties or setbacks,
CIM S.p.A.
SERVICE DEPARTMENT will be happy to provide
you with the necessary advice and assistance.
CIM S.p.A. declines any liability for any injury or
damage resulting from incorrect or unsuitable
operations.
CIM S.p.A. reserves the right to make any
modifications aimed at improving its products
without prior notification.
Please ensure that any amendments or updates
you may receive are kept with the original version
of this manual.
0.1.2 Conserving the manual
Do not tear or remove pages from the manual, or
overwrite any parts of the manual for any reason.
Keep the manual in safe place protected from
excess heat and humidity.
0.1.3 Consultation the manual
This manual comprises:
• COVER PAGE IDENTIFYING THE TYPE OF
PRODUCT
• TABLE OF CONTENTS
• INSTRUCTIONS AND/OR NOTES ON THE
PRODUCT
The INSTRUCTIONS AND/OR NOTES ON THE
PRODUCT define the safe working practices,
correct procedures and skills required to service
the machine correctly.
Please note that some of the illustrations in the
manual, which are included to help you identify
the parts described in the text, show standard
engines and therefore may differ in some details
with respects to the product in your possession.
0.1.4 Symbols used in the manual
The Safety symbols and notices shown below are
used throughout this manual to draw the reader’s
attention to the hazards associated with particular
procedures and operations which could result in
damage to the machines or personal injury, or to
indicate good working practices.
The same warning simbols are also placed on the
machine to indicate dangerous areas.
MEANING OF THE SYMBOLS
GENERAL OPERATIONAL NOTE
PAY ATTENTION TO THE SYMBOLS
AND TO THE INSTRUCTIONS IN THE
ADJACENT TEXT.
Safety notices (rectangular): you must use the
protection shown in the notices when carrying
out the operation in question to avoid risk of
personal injury:
PROTECT YOUR HANDS (WEAR
GLOVES)
PROTECT YOUR EYES (WEAR SAFETY
GOGGLES)
S0000020
PROTECT YOUR HEARING (HEAD
PHONES)
Danger warning signs (triangular): General
warning of risk of personal injury or damage to
the product:
CAUTION ! GENERAL DANGER.
CAUTION ! HIGH TENSION.
S00000104
CAUTION ! HIGH TEMPERATURE
HAZARD
REV. 05-2008