CIM MDM 1000, Operator'S Manual

Page: 63 / 100

A-63
REV. 04.2002 METAL DOT MATRIX
THE MACHINE'S SETUP A
OPERATORS MANUAL
BLOC CHAR SPACING
SELECTION (015-058)
(32)
This parameter permits to modify the interchar
spacing used by XON/XOFF protocol and card
test. The value represunts the number of step of
the motor.
Active only when NORM/BLOC is setted as BLOC
.
Press
BLOC LINE SPACING
SELECTION (016-080)
(48)
This parameter permits to modify the interline
spacing used by XON/XOFF protocol and card
test. The value represunts the number of step of
the motor.
Active only when NORM/BLOC is setted as BLOC
Press
PLATE HEIGHT (MM)
SELECTION (020-090)
(054)
Press
CIMLIKE FUNCTION
SELECTION (000-127)
(NO)
The value of the Opener Format in the CIMLIKE
protocol. The value 000 (NO) for protocol CIM
Standard
Press
CIM MULTIBUFFER
(ON/OFF)
(OFF)
Enable "spooling" mode:
with multibuffer= on all the date of the plate you
have to print sholud be sent fron the PC to the
machine before the execution of the first card
(not available with software Sword)
Press
REV. 05-2008