CIM MDM 1000, Operator'S Manual

Page: 41 / 100

5-41
METAL DOT MATRIX REV. 04.2002
HOW TO PRODUCE ONE CARD 5
OPERATORS MANUAL
Fig. 5.14
Fig. 5.15
Fig. 5.16
To define a layout do the following steps:
Press the "Nuova Etichetta" button on the main
box and double click in the yellow box will
appear. Type a symbolic text (i.e. "METAL DOT
MATRIX 2000" in the example) and press Enter.
Add the text boxes you need by repeating the
last steps. You can move each box by drug&drop
or writing the coordinates in the "Posizione X",
"Posizione Y" and "Lunghezza" boxes.
Type the name of the new job in the Job box (i.e.
"METAL DOT MATRIX 2000") and press "Salva Job".
The windows will appear as shown in fig. 5.14.
Now you can recall the job by means of the JOB
button in the archivio box on the right.
After these steps you are ready to print your first
plate. Press the AVVIO button to start the
production.
Press "Stampa subito" on the following box.
In the next window you can type the number of
card you want to print. Then press OK (fig. 5.16).
The machine will print the specified number of
plates with the current job text layout.
If errors don't have occurred the MDM2000 stop
the work and go to READY status.
If errors have occurred during the working cycle
the Stamper will indicate the error codes on the
LCD display. Please refer to the chapter 7 "Trouble
Shooting" for a description of the errors.
Open the top door and remove the plate just
personalized from the unloader magazine on
the left of the stamping unit.
REV. 05-2008