Chrysler 300 2018 Owner'S Manual Download Page 435

Page: 435 / 485

Setting Name

Selectable Options

Passive Entry — If

Equipped

NOTE:
The “Passive Entry” feature allows you to lock and unlock the vehicles door(s) without having to push the key fob

lock or unlock buttons. To make your selection, press the “Passive Entry” button on the touchscreen, until a check-

mark appears next to the setting, showing that the setting has been selected.

Personal Settings Linked

To Key Fob — If

Equipped

NOTE:

•

This feature provides automatic recall of all settings stored to a memory location (driver’s seat, exterior mirrors,

steering column position and radio station pre-sets) to enhance driver mobility when entering and exiting the ve-

hicle.

•

The seat will return to the memorized seat location (if “Personal Settings Linked to Key Fob” is set to on) when the

key fob is used to unlock the door.

MULTIMEDIA

433

Summary of Contents for 300 2018






































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands

Chrysler 300 2018, Owner'S Manual

Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands