Chrysler 300 2018 Owner'S Manual Download Page 148 | Manualshive

Page: 148 / 485

background image

WARNING!

(Continued)

road conditions. ESC cannot prevent accidents, in-
cluding those resulting from excessive speed in
turns, driving on very slippery surfaces, or hydro-
planing. ESC also cannot prevent accidents resulting
from loss of vehicle control due to inappropriate
driver input for the conditions. Only a safe, attentive,
and skillful driver can prevent accidents. The capa-
bilities of an ESC equipped vehicle must never be
exploited in a reckless or dangerous manner which
could jeopardize the user’s safety or the safety of
others.

•

Vehicle modifications, or failure to properly main-
tain your vehicle, may change the handling charac-
teristics of your vehicle, and may negatively affect
the performance of the ESC system. Changes to the
steering system, suspension, braking system, tire
type and size or wheel size may adversely affect ESC
performance. Improperly inflated and unevenly
worn tires may also degrade ESC performance. Any
vehicle modification or poor vehicle maintenance
that reduces the effectiveness of the ESC system can
increase the risk of loss of vehicle control, vehicle
rollover, personal injury and death.

ESC Operating Modes

NOTE:

Depending upon model and mode of operation, the

ESC system may have multiple operating modes.
ESC On

This is the normal operating mode for the ESC. Whenever

the vehicle is started, the ESC system will be in this mode.

This mode should be used for most driving conditions.

Alternate ESC modes should only be used for specific

reasons as noted in the following paragraphs.
Partial Off

The “Partial Off” mode is intended for times when a more

spirited driving experience is desired. This mode may

modify TCS and ESC thresholds for activation, which

allows for more wheel spin than normally allowed. This

mode may be useful if the vehicle becomes stuck.
To enter the “Partial Off” mode, momentarily push the

“ESC Off” switch and the “ESC Off Indicator Light” will

illuminate. To turn the ESC on again, momentarily push

the “ESC Off” switch and the “ESC Off Indicator Light”

will turn off.

146

SAFETY

«
...
146
147
148
149
150
...
»

Summary of Contents for 300 2018






































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2018

Brand: Mazda Pages: 4

Brand: JAC Pages: 70

Brand: Daihatsu Pages: 43

UNIVERSAL CJ-2A

Brand: Jeep Pages: 27

Brand: Jeep Pages: 228

Brand: Jeep Pages: 108

Brand: Jeep Pages: 525

PRIME DESIGN VCR 326

Brand: Safe Fleet Pages: 16

Prime Design VBC PC11

Brand: Safe Fleet Pages: 8

Prime Design AR1418

Brand: Safe Fleet Pages: 4

Brand: Camcar Pages: 6

Brand: ABL Pages: 4

Brand: AutoWatch Pages: 4

Brand: Cadillac Pages: 409

Brand: Fortin Pages: 9

Parktronic system Volkswagen Golf MK7

Brand: Car-Systems Pages: 10

2000 Oldsmobile Intrigue

Brand: Oldsmobile Pages: 348

SANICON TURBO 300

Brand: Thetford Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands