Chrysler 300 2018 Owner'S Manual Download Page 356

Page: 356 / 485

A/C Air Filter
The filter is located in the fresh air inlet under the hood,

behind a removable panel in the cowl on the passenger side

of the vehicle, next to the windshield wipers. When install-

ing a new filter, ensure its proper orientation.
1. Remove the access door in the cowl screen by pressing

the retaining clips.

2. Unsnap both ends and lift the filter access cover.

3. Remove the used filter.
4. Install the new filter with arrows pointing in the direc-

tion of airflow, which is toward the rear of the vehicle

(text and arrows on the filter will indicate this).

Access Door

Filter Access Cover

354

SERVICING AND MAINTENANCE

Summary of Contents for 300 2018






































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands

Chrysler 300 2018, Owner'S Manual

Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands